1320 Junkie 15-20 GT350 Ported Manifold
$825.00Unlock more power and performance with the 1320 Junkie Performance Fully Ported GT350 Intake Manifold. This manifold is expertly ported to enhance airflow, optimizing engine performance.
Showing 1–16 of 27 results
1320 Junkie Boost Proof Ported Boss
$660.00 – $710.00The renowned and record-setting Boss BP unit is one of the top-performing Boss manifolds available today. Enhance your vehicle’s performance with the 1320 Junkie Performance Boost Proof Boss 302 Manifold. Designed to improve airflow and provide additional reinforcement for handling boost, this manifold is the perfect upgrade for Gen 1-3 Coyote-powered Mustangs and F-150s (up to 2020).
1320 Junkie Ported 18+ GT Manifold w/ Free IMRC Lockouts
$660.00Boost your engine’s performance with the 1320 Junkie Performance Ported 18+ Intake Manifold. Ported for improved airflow to increases horsepower and torque.
Note: Includes Free IMRC Lockouts
1320 Junkie Ported Boss Manifold
$560.00Upgrade your vehicle’s performance with the 1320 Junkie Performance Hand-Ported Boss 302 Manifold. This high-performance manifold enhances airflow and increases horsepower. It’s designed to fit most Gen 1-3 Coyote-powered Mustangs and F-150s (up to 2020)
1320 Junkie Ported Cobra Jet Manifold
$1,600.00 – $1,700.00Maximize your engine’s performance with the 1320 Junkie Performance V2 Ported Cobra Jet Intake Manifold. Known as the “king” of manifolds, it’s expertly ported for superior airflow. Choose between two ported inlet options: the standard dual or the monoblade.
AEM X-SERIES OBDII WIDEBAND AFR CONTROLLER GAUGE
$235.00Unlock your vehicle’s full potential with the AEM X-Series OBDII Wideband AFR Controller Gauge. Engineered for precision, this advanced gauge provides real-time Air-Fuel Ratio (AFR) monitoring, ensuring optimal performance during full throttle tuning. Easily integrating with your vehicle’s OBDII system, it’s the perfect tool for enthusiasts looking to fine-tune their engine for power, efficiency, and reliability. PBP Tuning recommends this for Dodge and Chevrolet vehicles.
DODGE 2018 SMART ACCESS CABLE
$89.00Ready to unlock the full potential of your 2018+ Dodge vehicle? The Dodge 2018 Smart Access Cable provides seamless connectivity for reading, writing, and performing special functions for tuning and diagnostics. Compatible with VCM Suite software, this cable is your key to advanced tuning capabilities and real-time vehicle data access. This is required for any 2018+ dodge vehicle wanting a PBP Tune.
DODGE PCM
$249.99Ready to tune your 2015+ Dodge or Chrysler vehicle with PBP Tuning? The PCM Upgrade Service is required to unlock the PCM for tuning via HPTuners software. This service applies to all Dodge and Chrysler models (excluding the 2015+ Dodge Viper and 2014-2019 Dodge/Chrysler vehicles with the EDC17C79 PCM).
Upgrade Service The one-time, send-in upgrade service will upgrade your original or spare PCM, enabling tuning capabilities. Simply send in your PCM, and it’ll return fully upgraded for seamless tuning. When checking out, make sure to include the make and model of your vehicle, the stock file, and your VIN (double-check your VIN for accuracy to avoid delays). This service typically takes 1-3 business days to complete (excluding shipping time). Feel free to submit an inquiry in case you need assistance.
Important Note: This is a send-in service—you’ll need to send HP Tuners your original or spare PCM for servicing. For 2018+ models, you’ll also need the HP Tuners Dodge 2018+ Smart Access Cable (link) to complete your tuning setup.
Important: Ensure your PCM is in good condition before sending it in—PCMs with broken locking tabs or connectors will not be accepted for upgrade.
Shipping Address for Send-In Services: HP Tuners ATT: Dodge PCM Services 700 Eastwood Ln, Buffalo Grove, IL 60089
Grip Package – Stage 1
$679.85 – $699.85Upgrade your car’s performance with the PBP Tuning LLC Stage 1 Grip Package. This kit includes high-quality BMR Suspension components designed to help with grip and overall handling.
What’s Included:
BMR SP086 – Drag Springs (Naturally Aspirated) OR BMR SP083 – Handling Springs (Boosted): Choose the right springs for your setup: both springs are designed to improve traction for better launches.
BMR CB005 – Cradle Bushing Lockout: Reduce rear-end movement for a more direct connection and better control.
BMR TCA046 – Vertical Links: Increase rear suspension stiffness, reducing wheel hop and enhancing grip.
BMR TCA046 – Vertical Links: Increase rear suspension stiffness, reducing wheel hop and enhancing grip.
Grip Package – Stage 2
$2,439.33 – $2,459.33Take your performance to the next level with the PBP Tuning LLC Stage 2 Grip Package. This package builds on the Stage 1 kit, adding even more suspension upgrades for maximum grip, handling and stability.
What’s Included:
BMR SP086 – Drag Springs (Naturally Aspirated) OR BMR SP083 – Handling Springs (Boosted): Choose the right springs for your setup: both springs are designed to improve traction for better launches.
BMR SP086 – Drag Springs (Naturally Aspirated) OR BMR SP083 – Handling Springs (Boosted): Choose the right springs for your setup: both springs are designed to improve traction for better launches.
BMR CB005 – Cradle Bushing Lockout: Reduce rear-end movement for a more direct connection and better control.
BMR TCA046 – Vertical Links: Increase rear suspension stiffness, reducing wheel hop and enhancing grip.
BMR TCA046 – Vertical Links: Increase rear suspension stiffness, reducing wheel hop and enhancing grip.
New Additions in Stage 2:
BMR CB762 – IRS Subframe Support Brace: Strengthens the IRS subframe for better rear-end stability and increased power transfer.
BMR TR005 – Toe Rods: Provides precise rear alignment adjustments, improving handling and reducing tire wear.
BMR UTCA064 – Camber Arms: Ensures proper alignment for optimal tire contact, improving cornering and grip.
Kelltrac Rear Shocks – Viking Crusader Shocks (Inverted): Upgraded shocks that allow you to adjust rebound and compression for overall better traction control.
BMR UTCA064 – Camber Arms: Ensures proper alignment for optimal tire contact, improving cornering and grip.
Kelltrac Rear Shocks – Viking Crusader Shocks (Inverted): Upgraded shocks that allow you to adjust rebound and compression for overall better traction control.
Grip Package – Stage 3
$4,239.32 – $4,259.32Push your vehicle’s performance to the extreme with the PBP Tuning LLC Stage 3 Grip Package. Building on the Stage 2 setup, this package adds cutting-edge front coilovers.
What’s Included:
BMR SP086 – Drag Springs (Naturally Aspirated) OR BMR SP083 – Handling Springs (Boosted): Choose the right springs for your setup: both springs are designed to improve traction for better launches.
BMR SP086 – Drag Springs (Naturally Aspirated) OR BMR SP083 – Handling Springs (Boosted): Choose the right springs for your setup: both springs are designed to improve traction for better launches.
BMR CB005 – Cradle Bushing Lockout: Reduce rear-end movement for a more direct connection and better control.
BMR TCA046 – Vertical Links: Increase rear suspension stiffness, reducing wheel hop and enhancing grip.
BMR TCA046 – Vertical Links: Increase rear suspension stiffness, reducing wheel hop and enhancing grip.
BMR CB762 – IRS Subframe Support Brace: Strengthens the IRS subframe for better rear-end stability and increased power transfer.
BMR TR005 – Toe Rods: Provides precise rear alignment adjustments, improving handling and reducing tire wear.
BMR UTCA064 – Camber Arms: Ensures proper alignment for optimal tire contact, improving cornering and grip.
Kelltrac Rear Shocks – Viking Crusader Shocks (Inverted): Upgraded shocks that allow you to adjust rebound and compression for overall better traction control.
New Additions in Stage 3:
Kelltrac Long Travel Front Coilovers: Advanced coilovers designed to offer more front-end control and increase travel.
MG1 PCM (FORD)
$99.99Ready to tune your 2021-2023 Ford F-150 5.0L V8 truck with PBP Tuning? This service is required to unlock the PCM for tuning via HPTuners software. This service enables full functionality of HP Tuners software, allowing for custom tuning using PBP Tuning’s RTD, MPVI2+ or newer generation HP Tuners interface.
Upgrade Service Details This one-time upgrade service requires you to send HP Tuners your truck’s original Ford MG1 PCM for professional upgrading. After the upgrade, you’ll be able to calibrate, log, and scan via the OBDII port. Simply remove the original PCM from your truck, send it to HP Tuners headquarters for servicing, and it’ll be returned fully upgraded and ready for tuning.
Key Features:
- No IMMO or crank relearns required, as long as the PCM is installed back into the same vehicle.
- Unlocks full tuning, data logging, and diagnostic capabilities with HP Tuners software. Important Notes:
- Licensing credits are not included in the upgrade service and must be purchased separately.
Shipping Address for Ford MG1 PCM Service: HP Tuners Attn: Ford MG1 PCM Service 700 Eastwood Ln, Buffalo Grove, IL 60089
PBP Tuning Back Window
$20.00Rep the PBP fam wherever you go with the Rear Window PBP Tuning Sticker made by Sam.Decals.
Note: Please allow 3–5 business days for shipping as each sticker is made to order. After purchasing, we will reach out to see what color you would like.
PBP Tuning Beanies
$12.00
PBP Tuning Front Windshield
$25.00Rep the PBP fam wherever you go with the Front Window PBP Tuning Sticker made by Sam.Decals.
Note: Please allow 3–5 business days for shipping as each sticker is made to order. After purchasing, we will reach out to see what color you would like.
